June 24, 2008So what has every one done to there jeep walst the site was down, I know some of you have had some work done. Me just ordered a polypro roll cage and mastercraft baja seats. I''m getting Tim''s Welding and Fab shop out in Lampassess to do the in stall. getting it tied to the frame and four point belts to hold my *** in the seat.
Forums : Suspension : New Mod,s (5192 Views)
June 24, 2008The only thing I have done to mine is let it sit & rot.
Ohh I did steal a batt terminal off of it for the truck!
June 24, 2008Tim took off my non-flexing 4" lift and did a spring over with stock YJ springs . . . uh, lost my job . . . my car got totalled . . . bought a 08 Dodge Caliber . . . and that''s about it
June 24, 2008Been workin on the toy hauler....
June 24, 2008dang sorry all. site went down so did you all...kim still is taken all my money and she got a second job plus a raise at her other job so should be doing a few things with in the year
June 24, 2008Its easier to stay in the seat if you aint rolling. right Timmy.
June 24, 2008Been trying to get the cluch to jump in by it self and the front part of the moter on the other.
June 24, 2008Well, went wheelin once since we got back form Moab....easy run... came home with bent front d shaft, broken motor mount, broken fan shroud, 2 bad Ujoints, broke tranny mount, 2 bent leaf springs, and 2 inverted front springs. This passed weekend, I replaced motor mount, re-worked the tranny mount, replaced the front spings with RE SOA''s, sent off front shaft to be re-worked, replaced rear shaft, repaired the fan shroud, re-built the anti wrap bar, and rebuilt the rear springs with 2 main leaf. Hope this holds me over til I can get the 4-link done. We shall see as we are goin wheelin this weekend
June 25, 2008WOW!
We are back.
I still like the other site though, this just don''t work *or* look as well..
June 25, 2008Holy Crap Steve, that''s a ton of stuff to fix. I''m pricing out for an SYE for my jalopy, and new belly pan too. I''m shooting for mid July to get either started *or* have done by
June 25, 2008Sent my shafts off. The guy is going to warranty the rear one and replace both of the jounts and rebuild the CV. He was like Can''t belive how bad they were with only 7 runs on them. He said he is going to send the joints back to spicer for evaluation.
June 26, 2008id like to see your driveline angles steve.....bet the answers are there. pretty tall rig isnt it? its not as hard as you think to exceed a safe angle on a double cardan joint
what you mean rolling? maybe a flop *or* two......the seats hold me in pretty good.
other than some custom body work..... same ol rig here