July 1, 2008My bad should have proof read I guess...supposed to have said 16 feet (total length) and found some 4foot pcs of thick wall for $8.5 a foot @ $136.....so we will call it $500
Forums : Suspension : 4 linking the CJ (11550 Views)
|1 |||2 |||3 |||4|
July 1, 2008i wouldnt go any less than .250" wall for the lowers....... and those will bend too. what size rod ends? *or* have other ideas?
July 1, 2008http://www.ballisticfabrication.com/DOM-Tubing-by-the-foot_c_18.html
ball park figure.......sure it can be found for less *or* more
July 1, 2008I have changed my mind again. I am going with the ultimate setup, Fiberglass Mono springs Just one spring per wheel (no spring pack), a lot less weight, and you can even carry a spare just in case you break one,they say you wont, but you never know. I am going with double anti wrap bars on the rear and a single one in front. this should eliminate the rock humping and provide a means to lay the traction on the rocks
July 1, 2008you would think those springs would wrap bad......but no experience with them. as for as axle wrap in the rear, if it cant be controlled with one bar, why would two be any better? its not like one side has wrap and the other doesnt.....id look more into the geometry of the bar you have. shackle angle etc. ive seen them in the front on some heavy rigs..... but wouldnt think it would be worth the trouble on yours. besides front axle wrap doesnt seem to cause the rock humping......cure it in the rear and you will be happier. linking the rear would be the ultimate set up.......
i just like to keep my cost to fun ratio lower than some people.
and steve.......with your tire size and wheelbase your rig works good. only thing i think it needs is to be wider.
just my two cents
July 1, 2008I am not sure how I can get much wider. I am running full with axles with 1 1/2" wheel spacers and 3 1/2" backspacing on the wheels now. Oh and was just chittin ya on the mono and 3 wrap bars
July 1, 2008I think he is talking to me. The other Steve.
Tims, lets get together soon and talk about this.
July 1, 2008theres just to many steve''s out there CJSteve and YJSteve were is JK,TJ,LJ and KJ and I know there''s more of you guy''s out there after that I think I need to have one
July 1, 2008yeah other steve on the width.......
July 1, 2008Sorry for the hyjack.....
July 1, 2008no problem, Steveo, I asked for input. thanks.
I looked up wheel spacers. 200 bucks plus shipping. And I still want some more wheel base. Not sure how yet.
|1 |||2 |||3 |||4|