September 29, 2014hi all,
Thought I`d share some info for the JK folks as I found a cool, well made transfer case brace. Why the need for the brace you ask? For those of you who have never seen or heard of the transfer cases breaking here is some insight. Most Driveshaft manufacturers cannot spin the driveshaft in their balancer as they spin on your JK with the lower gears installed. An out of balance or bent drive shaft, or failed cv center ball can cause this. The T-Case in the picture was driving down the interstate at 75mph with brand new driveshafts in it when the explosion happened.
So with that in mind, I went ahead and ordered the brace. I don`t have any install photos (I`ll try to get some) however the install was straight forward and all of the holes/machining were spot on.